Linde Forklift trucks, LPG (393 series)

Coolant capacity & service interval

Linde Forklift trucks, LPG (393 series) use coolant with a capacity range of 7 to 8 liters. Service intervals include checking every 10 hours and changing every 9000 hours. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
H20 T, 393-02 / VW BEF (2015- )
  • Use: Normal
  • Capacity 7 liter
  • Capacity 8 liter (+ heater)
  • Check 10 hours
  • Change 9000 hours
H25 T, 393-02 / VW BEF (2015- )
  • Use: Normal
  • Capacity 7 liter
  • Capacity 8 liter (+ heater)
  • Check 10 hours
  • Change 9000 hours

Additional Notes

  • The Linde Forklift trucks, LPG (393 series) H20 T and H25 T models, both fitted with the VW BEF engine, share an identical coolant capacity of 7 liters for the base cooling system configuration.
  • When an optional cabin heater is installed on either the H20 T or H25 T, the total coolant capacity increases to 8 liters, reflecting the additional fluid volume required to fill the heater circuit.
  • A coolant check interval of 10 hours applies to both configurations under normal use conditions, indicating a very frequent inspection cycle consistent with the demanding duty patterns typical of industrial forklift operation.
  • The coolant change interval is set at 9,000 hours for both the H20 T and H25 T under normal use conditions, a figure expressed in operating hours rather than calendar time, which is standard practice for equipment that may run continuously across shifts.