Linde Forklift trucks, LPG (392 series)
Coolant capacity & service interval
Linde Forklift trucks, LPG (392 series) require coolant with a capacity range of 7 to 8 liters. Service intervals include a check every 10 hours and a change every 9000 hours. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| H20 T, 392-02 / VW BEF (2015- ) |
|
| H25 T, 392-02 / VW BEF (2015- ) |
|
Additional Notes
- The Linde Forklift trucks, LPG (392 series) H20 T and H25 T, both 392-02 / VW BEF variants from 2015, share identical coolant capacities of 7 liters for the base cooling system configuration.
- When an optional heater is installed on either the H20 T or H25 T, the cooling system capacity increases to 8 liters, reflecting the additional fluid volume required to fill the heater circuit.
- The 1-liter difference between the base and heater-equipped configurations represents a meaningful distinction for service fills, as underfilling a heater-equipped unit to the base 7-liter figure would leave the heater circuit incompletely filled.
- A coolant check interval of 10 hours applies to both the H20 T and H25 T under normal use conditions, which in industrial forklift operation typically corresponds to a daily or pre-shift inspection frequency given standard shift lengths.
- The coolant change interval for both variants is set at 9000 hours under normal use conditions, a figure that in continuous multi-shift forklift operation can represent several years of accumulated service time.