Linde Forklift trucks, diesel (321 series)

Automatic transmission fluid capacity & service interval

Linde Forklift trucks, diesel (321 series) require Automatic transmission fluid with a capacity of 50 liter. Service intervals include a check at 10 hours and a change at 1000 hours. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • H420, Volvo TD100G
  • Powershift
  • Use: Normal
  • Capacity 50 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: 4/4

Additional Notes

  • The Linde Forklift trucks, diesel (321 series) H420 with Volvo TD100G engine carries a powershift transmission fluid capacity of 50 liters, which is a substantial fill volume consistent with heavy-duty industrial powershift units that house large fluid reservoirs to manage heat and lubrication demands across extended operating cycles.
  • Under normal use conditions, the powershift transmission on the H420 with Volvo TD100G calls for a fluid level check every 10 hours of operation, reflecting the short inspection interval typical of high-load industrial equipment where fluid condition and level are critical to transmission integrity.
  • The fluid change interval for the H420 Volvo TD100G powershift transmission is set at 1,000 hours under normal use conditions, a figure that aligns with heavy industrial service schedules where operating hours rather than calendar time serve as the primary maintenance metric.

Other Systems