Linde Forklift trucks, diesel (319 series) ( -1993)

Automatic transmission fluid capacity & service interval

Linde Forklift trucks, diesel (319 series) ( -1993) require Automatic transmission fluid with a capacity of 45,5 liter. Service intervals include checking every 10 hours and changing every 1000 hours. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • H120.02, Perkins 6.3544 ( -1993)
  • Powershift
  • Use: Normal
  • Capacity 45,5 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: 3/3
  • H136, Perkins 6.3544 ( -1993)
  • Powershift
  • Use: Normal
  • Capacity 45,5 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: 3/3

Additional Notes

  • The Linde Forklift trucks, diesel (319 series) powershift transmission holds 45.5 liters of automatic transmission fluid, a substantial volume consistent with heavy-duty industrial powershift units that integrate the torque converter, gearbox, and hydraulic control circuits into a single shared sump.
  • A check interval of every 10 operating hours applies to both the H120.02 and H136 configurations equipped with the Perkins 6.3544 engine, reflecting the demanding duty cycles typical of counterbalance forklifts where fluid condition and level can shift rapidly under load.
  • The fluid change interval is set at 1000 operating hours under normal use conditions for both the H120.02 and H136 variants, placing routine powershift transmission service well within the range expected for industrial equipment operating on defined maintenance schedules.
  • Both the H120.02 and H136 share identical capacity and interval figures despite being distinct model designations, indicating the same powershift transmission assembly was used across multiple lift capacity variants within the 319 series.

Other Systems