Linde Forklift trucks, diesel (314 series)

Automatic transmission fluid capacity & service interval

Linde Forklift trucks, diesel (314 series) require Automatic transmission fluid with a capacity of 50 liter. Service intervals include a check at 10 hours and a change at 1000 hours. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • C350.01, Volvo TD100G
  • Powershift
  • Use: Normal
  • Capacity 50 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: 4/4
  • C350.04, Volvo TD100G
  • Powershift
  • Use: Normal
  • Capacity 50 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: 4/4
  • H420, Volvo TD100G
  • Powershift
  • Use: Normal
  • Capacity 50 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: 4/4

Additional Notes

  • The powershift transmission across the C350.01, C350.04, and H420 variants, all equipped with the Volvo TD100G engine, carries a fluid capacity of 50 liters. A capacity at this scale is characteristic of heavy-duty powershift units, where a large fluid volume is needed to sustain hydraulic pressure for gear engagement and to manage heat generated under load.
  • The Linde Forklift trucks, diesel (314 series) specifies a check interval of every 10 hours for the powershift transmission fluid. A 10-hour interval corresponds roughly to a single operator shift, meaning fluid level verification is expected as a routine pre- or post-shift task rather than a periodic maintenance event.
  • The fluid change interval for the powershift transmission is set at 1000 hours under normal use conditions. In industrial equipment, 1000-hour intervals are a common benchmark for heavy drivetrain components, reflecting the extended service life expected from a large-volume fluid charge in a controlled operating environment.
  • All three configurations, the C350.01, C350.04, and H420, share identical capacity, check, and change specifications at 50 liters, 10 hours, and 1000 hours respectively. The uniformity across these variants indicates the same powershift transmission assembly is used regardless of the differing truck model designations within the 314 series.
  • The specifications apply under normal use conditions. The 1000-hour change interval and 10-hour check interval are both tied directly to normal operating conditions, meaning applications classified as severe duty may fall outside the scope of what these figures address.

Other Systems