Iveco-Astra ADT

Coolant capacity & service interval

Iveco-Astra ADT coolant capacity ranges from 37 to 100 liters. Service intervals require changes every 1200 hours or 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
30D, Iveco Cursor 10 (F3A) Stage IIIA/Tier 3 (2014- )
  • Use: Normal
  • Capacity 42 liter
  • Change 1200 hours/ 24 months
40D, Iveco Cursor 13 (F3B) Stage IIIA/Tier 3 (2014- )
  • Use: Normal
  • Capacity 47 liter
  • Change 1200 hours/ 24 months
  • 40D, Iveco Cursor 13 (F3B) Stage IIIA/Tier 3 (2014- )
  • Brake cooling
  • Use: Normal
  • Capacity 90-100 liter
25C, Iveco Cursor 10 (F3A) Stage IIIA/Tier 3 (2007- )
  • Use: Normal
  • Capacity 37 liter
  • Change 1200 hours/ 24 months
30C, Iveco Cursor 10 (F3A) Stage IIIA/Tier 3 (2007-2014)
  • Use: Normal
  • Capacity 42 liter
  • Change 1200 hours/ 24 months
35C, Iveco Cursor 13 (F3B) Stage IIIA/Tier 3 (2007- )
  • Use: Normal
  • Capacity 43 liter
  • Change 1200 hours/ 24 months
40C, Iveco Cursor 13 (F3B) Stage IIIA/Tier 3 (2007-2014)
  • Use: Normal
  • Capacity 47 liter
  • Change 1200 hours/ 24 months
  • 40C, Iveco Cursor 13 (F3B) Stage IIIA/Tier 3 (2007-2014)
  • Brake cooling
  • Use: Normal
  • Capacity 90-100 liter

Additional Notes

  • The Iveco-Astra ADT cooling system capacities range from 37 liters on the 25C up to 47 liters on the 40C and 40D, reflecting the larger thermal management demands of the bigger Cursor 13 (F3B) engine relative to the Cursor 10 (F3A).
  • The 30C and 30D share an identical 42-liter cooling system capacity despite representing different model year designations, with the Cursor 10 (F3A) engine common to both configurations.
  • The 35C, powered by the Cursor 13 (F3B), carries a 43-liter cooling system capacity, placing it between the Cursor 10 (F3A) variants and the larger 40-series Cursor 13 (F3B) machines at 47 liters.
  • All engine cooling systems across the ADT range share a uniform change interval of 1,200 hours or 24 months under normal use conditions, whichever comes first. The dual-trigger format means time elapsed can mandate a change even when the hour threshold has not been reached.
  • The 40C and 40D both carry a separate brake cooling system with a capacity of 90-100 liters. This range, rather than a fixed value, reflects variation in the actual fill level depending on system configuration or fill procedure.
  • At 90-100 liters, the brake cooling system on the 40C and 40D holds roughly twice the fluid volume of the engine cooling system on the same machines. Wet disc brake systems on articulated dump trucks typically require large fluid volumes to manage heat generated during repeated heavy braking on grade.
  • No change interval is listed for the brake cooling system on either the 40C or 40D, in contrast to the engine cooling systems across all configurations, which carry the 1,200-hour/24-month interval.
  • The 25C with the Cursor 10 (F3A) engine has a 37-liter cooling system capacity, which is 5 liters less than the 30C and 30D using the same engine family. The difference corresponds to the smaller overall machine size of the 25C within the ADT lineup.

Other Systems