Hanix Wheeled loaders

Coolant capacity & service interval

Hanix wheeled loaders require coolant with a capacity of 14 liters. The service interval for coolant replacement is 24 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
HL 145 (2011- )
  • Use: Normal
  • Capacity 14 liter
  • Change 24 months
HL 155 (2011- )
  • Use: Normal
  • Capacity 14 liter
  • Change 24 months
HL 165 (2011- )
  • Use: Normal
  • Capacity 14 liter
  • Change 24 months

Additional Notes

  • The Hanix Wheeled Loaders HL 145, HL 155, and HL 165 each share an identical cooling system capacity of 14 liters, indicating a uniform engine cooling architecture across all three models in the 2011 lineup.
  • A 14-liter coolant capacity is a relatively substantial figure for wheeled loader cooling systems, reflecting the thermal management demands of heavy-duty hydraulic and drivetrain components operating under load.
  • The cooling system change interval for all three models is set at 24 months under normal use conditions, meaning the interval applies to standard operating environments rather than extended high-stress or dusty field conditions.
  • The 24-month service interval is tied specifically to normal use, which in heavy equipment contexts typically refers to moderate duty cycles without prolonged exposure to extreme temperatures or contaminated environments.
  • The capacity figure of 14 liters represents a service fill measurement for the cooling system, reflecting the volume required during a standard coolant drain and refill rather than a full system overhaul with component replacement.
  • All three models, the HL 145, HL 155, and HL 165, carry production start dates from 2011, and each shares the same 14-liter capacity and 24-month change interval without any variation across the model range.

Other Systems