Fenwick Forklift trucks, LPG (393 series)
Coolant capacity & service interval
Fenwick Forklift trucks, LPG (393 series) require coolant with a capacity range of 7 to 8 liters. Service intervals consist of a 10 hour check and a 9000 hour change. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| H20 T, 393-02 / VW BEF (2015- ) |
|
| H25 T, 393-02 / VW BEF (2015- ) |
|
Additional Notes
- The H20 T and H25 T, both 393-02 series with VW BEF engines starting from 2015, share identical cooling system capacities of 7 liters in the base configuration, rising to 8 liters when a heater is fitted to the circuit.
- The 1-liter difference between the base and heater-equipped configurations reflects the additional fluid volume held within the heater core and its connecting hoses, which become part of the coolant circuit when a cab heater is installed.
- A coolant check interval of 10 hours applies to both the H20 T and H25 T under normal use conditions, indicating a very frequent inspection cycle consistent with the demanding thermal environment of LPG-powered industrial equipment.
- The coolant change interval for both models is set at 9000 hours under normal use conditions, a figure that represents an extended service life typical of modern pre-mixed or long-life coolant formulations used in industrial engines.
- The Fenwick Forklift trucks LPG 393 series H20 T and H25 T carry the same capacity and interval figures despite differing load ratings, meaning the VW BEF engine's cooling system architecture is consistent across both variants in the 393-02 configuration.