Fenwick Forklift trucks, LPG (392 series)
Coolant capacity & service interval
Fenwick Forklift trucks, LPG (392 series) require coolant with a capacity range of 7 to 8 liters. Service intervals include a check at 10 hours and a change at 9000 hours. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| H20 T, 392-02 / VW BEF (2015- ) |
|
| H25 T, 392-02 / VW BEF (2015- ) |
|
Additional Notes
- The cooling system capacity for the H20 T and H25 T (392-02 / VW BEF) is 7 liters in standard configuration, rising to 8 liters when a heater is fitted to the circuit.
- The 1-liter difference between the standard and heater-equipped fills reflects the additional coolant volume held within the heater core and its associated plumbing.
- Both the H20 T and H25 T share identical cooling system capacities and service intervals, indicating a common engine and cooling architecture across the two load-capacity variants in the 392-02 series.
- A coolant check interval of 10 hours applies to both configurations under normal use conditions, which is a very short interval consistent with the demanding thermal cycles typical of LPG-powered forklift operation.
- The coolant change interval is specified at 9000 hours under normal use conditions, a figure that reflects extended-life coolant formulations rather than conventional antifreeze, which typically requires more frequent replacement.
- The Fenwick Forklift trucks, LPG (392 series) H20 T and H25 T entries carry a starting year of 2015 for the VW BEF engine variant, with both sharing the same cooling system specifications from that point forward.