Fenwick Forklift trucks, diesel (314 series)

Coolant capacity & service interval

Fenwick Forklift trucks, diesel (314 series) require 36 liters of coolant. Maintenance includes a 10 hour check interval and a 1000 hour change interval. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
C350.01, Volvo TD100G
  • Use: Normal
  • Capacity 36 liter
  • Check 10 hours
  • Change 1000 hours
C350.04, Volvo TD100G
  • Use: Normal
  • Capacity 36 liter
  • Check 10 hours
  • Change 1000 hours
H420, Volvo TD100G
  • Use: Normal
  • Capacity 36 liter
  • Check 10 hours
  • Change 1000 hours

Additional Notes

  • All three configurations in the Fenwick Forklift trucks, diesel (314 series) — the C350.01, C350.04, and H420 — share the Volvo TD100G engine, and each carries an identical cooling system capacity of 36 liters.
  • A 36-liter cooling system capacity is a relatively large figure, consistent with the demands of a heavy-duty industrial diesel engine operating in a forklift application where sustained load cycles generate significant heat.
  • The coolant check interval is set at 10 hours of operation under normal use conditions, which in practical terms corresponds to roughly a daily inspection frequency given a standard single-shift workday.
  • The coolant change interval across all three configurations is 1000 hours under normal use conditions, a figure that reflects the extended service life expected of industrial-grade coolant formulations in controlled operating environments.
  • Because the C350.01, C350.04, and H420 variants all share the same engine and the same 36-liter capacity with identical check and change intervals, no variation in cooling system specifications exists across the configurations listed.

Other Systems