Fenwick Forklift trucks, diesel (022 series)

Coolant capacity & service interval

Fenwick Forklift trucks, diesel (022 series) require 50 liter of coolant. Service intervals include a 10 hour check and a 2000 hour change. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
H180, Scania DS9 62A (1995- )
  • Use: Normal
  • Capacity 50 liter
  • Check 10 hours
  • Change 2000 hours
H200, Scania DS9 62A (1995- )
  • Use: Normal
  • Capacity 50 liter
  • Check 10 hours
  • Change 2000 hours
H220, Scania DS9 62A (1995- )
  • Use: Normal
  • Capacity 50 liter
  • Check 10 hours
  • Change 2000 hours
H236, Scania DS9 62A (1995- )
  • Use: Normal
  • Capacity 50 liter
  • Check 10 hours
  • Change 2000 hours
H250, Scania DS9 62A (1995- )
  • Use: Normal
  • Capacity 50 liter
  • Check 10 hours
  • Change 2000 hours
H280, Scania DS9 62A (1995- )
  • Use: Normal
  • Capacity 50 liter
  • Check 10 hours
  • Change 2000 hours

Additional Notes

  • All six variants in the Fenwick Forklift trucks, diesel (022 series) — H180, H200, H220, H236, H250, and H280 — share an identical cooling system capacity of 50 liters. In heavy industrial equipment, a 50-liter coolant capacity reflects the large thermal load generated by a high-displacement diesel engine operating under sustained lifting cycles.
  • Every listed variant is powered by the Scania DS9 62A engine, a six-cylinder inline diesel unit from Scania's DS9 family. The uniform engine fitment across all six power ratings explains why the cooling system capacity remains constant regardless of the output designation.
  • The coolant check interval is set at 10 hours of operation under normal use conditions. In industrial forklift applications, a 10-hour check interval aligns closely with a standard single work shift, making level verification a routine part of daily or per-shift maintenance.
  • The coolant change interval is specified at 2000 hours under normal use conditions. At a typical industrial operation rate of around 2000 hours per year, a 2000-hour change interval corresponds roughly to an annual service cycle, which is a common benchmark for heavy diesel equipment coolant maintenance.
  • The H180 through H280 designations reflect differing horsepower or kilowatt output ratings across the range, yet the shared Scania DS9 62A engine architecture means the cooling system specifications — capacity, check frequency, and change interval — are identical across all six configurations from 1995 onward.

Other Systems