Fenwick Container handlers (313 series)

Coolant capacity & service interval

Fenwick Container handlers (313 series) require coolant with a capacity of 25 liters. Service intervals include checking every 10 hours and changing every 2000 hours. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
C80/3, Perkins 1106C-E60TA
  • Use: Normal
  • Capacity 25 liter
  • Check 10 hours
  • Change 2000 hours
C80/4, Perkins 1106C-E60TA
  • Use: Normal
  • Capacity 25 liter
  • Check 10 hours
  • Change 2000 hours
C80/5, Perkins 1106C-E60TA
  • Use: Normal
  • Capacity 25 liter
  • Check 10 hours
  • Change 2000 hours

Additional Notes

  • The Fenwick Container handlers (313 series) cooling system capacity is 25 liters across the C80/3, C80/4, and C80/5 configurations, all equipped with the Perkins 1106C-E60TA engine.
  • A 25-liter cooling system capacity is consistent with a large industrial engine in a heavy-duty container handling application, where thermal management demands are significant.
  • I note that the check interval for the cooling system is set at 10 hours across all three configurations, which reflects the high-frequency inspection standard typical of heavy industrial equipment operating under normal use conditions.
  • The coolant change interval is 2000 hours for the C80/3, C80/4, and C80/5 under normal use conditions, a figure that aligns with extended-service coolant formulations commonly used in industrial machinery.
  • The C80/3, C80/4, and C80/5 share identical cooling system specifications, with no variation in capacity, check interval, or change interval across the three configurations despite their differing model designations.

Other Systems