Fenwick Container handlers (313 series)

Automatic transmission fluid capacity & service interval

Fenwick Container handlers (313 series) require automatic transmission fluid with a capacity of 15 liters. Service intervals include checking every 10 hours and changing every 1000 hours. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • C80/3, Perkins 1106C-E60TA
  • Powershift
  • Use: Normal
  • Capacity 15 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: 3/3
  • C80/4, Perkins 1106C-E60TA
  • Powershift
  • Use: Normal
  • Capacity 15 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: 3/3
  • C80/5, Perkins 1106C-E60TA
  • Powershift
  • Use: Normal
  • Capacity 15 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: 3/3

Additional Notes

  • The Fenwick Container handlers (313 series) powershift transmission holds 15 liters of automatic transmission fluid across the C80/3, C80/4, and C80/5 configurations, each paired with the Perkins 1106C-E60TA engine.
  • A 15-liter transmission fill is consistent with a service fill capacity, meaning fluid is added during routine maintenance rather than a full overhaul drain-and-refill of a larger sump.
  • The fluid check interval is set at 10 hours of operation under normal use conditions, which reflects the demanding load cycles typical of container handling equipment.
  • The fluid change interval is 1000 hours under normal use conditions, applying uniformly to the C80/3, C80/4, and C80/5 variants.
  • The identical capacity and interval specifications across all three variants indicate that the powershift transmission unit is shared between the C80/3, C80/4, and C80/5 configurations despite their differing model designations.

Other Systems