Ausa Wheeled dumpers
Manual transmission fluid capacity & service interval
Ausa wheeled dumpers require manual transmission fluid with a capacity of 2 liters. Service intervals include checks at 40 hours, changes at 50 hours, and changes at 12 months or 900 hours. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| D 300 AM, Kubota V2203-M (2008- ) |
|
| D 300 AM, Kubota V2203-M (2008- ) |
|
| D 300 AMG, Kubota V2203-M (2008- ) |
|
| D 300 AMG, Kubota V2203-M (2008- ) |
|
Additional Notes
- The Ausa Wheeled dumpers D 300 AM and D 300 AMG both carry a manual transmission fluid capacity of 2 liters, which represents the service fill volume for the transmission unit.
- Under normal use conditions, the transmission fluid check interval is set at every 40 hours of operation, indicating a relatively frequent monitoring schedule suited to the working demands of wheeled dumper equipment.
- The normal use change interval is defined by whichever threshold arrives first: 12 months or 900 hours of operation. Combining a time-based and an hours-based limit accounts for machines that may accumulate hours slowly yet still require periodic fluid renewal.
- An initial service change is specified at 50 hours for both the D 300 AM and D 300 AMG. A first-change interval at low hours is standard practice for new or rebuilt transmissions, as early operation generates fine metallic particles from component break-in that are best removed promptly.
- The D 300 AM and D 300 AMG share identical manual transmission fluid capacities and service intervals despite being distinct model variants, both powered by the Kubota V2203-M engine with a starting year of 2008.