Ammann Rubber tyred rollers, AP
Differential fluid capacity & service interval
Ammann Rubber tyred rollers, AP use differential fluid with a capacity of 6 liters. Service intervals include checks every 6 months or 500 hours and changes every 12 months or 1000 hours or every 250 hours. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
Additional Notes
- The rear differential on the Ammann AP 240 holds 6 liters of fluid, a figure that applies equally across both the Tier 2 and Tier 3 variants of the Cummins 4BT4.5-C99 engine for the 2006-2012 production span.
- Under normal use conditions, the rear differential fluid check interval is set at 6 months or 500 hours, whichever comes first, giving operators a dual-trigger schedule based on either calendar time or accumulated machine hours.
- The normal-use change interval extends to 12 months or 1000 hours, meaning the fluid is expected to remain serviceable for roughly twice the duration between checks before a full drain and refill is required.
- An initial service change is specified at 250 hours for both the T2 and T3 engine configurations, reflecting the common practice of removing break-in contaminants from a newly commissioned differential before the standard long-term interval takes effect.
- The initial service interval of 250 hours carries no calendar-based alternative, unlike the normal-use schedule, which pairs months with hours as equivalent triggers.
- The 6-liter rear differential capacity is consistent across the T2 and T3 engine tiers, indicating no variation in the differential assembly itself between those two emissions-rated configurations of the AP 240.