Ammann Articulated tandem rollers, AV

Automatic transmission fluid capacity & service interval

Ammann Articulated tandem rollers, AV require automatic transmission fluid with a capacity range of 1,4 to 3 liters. Service intervals include checks every 3 months or 250 hours and fluid changes every 12 months or 1000 hours. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • AV 110 X, Cummins Tier 3
  • Drum drive
  • Use: Normal
  • Capacity 2,5 liter
  • Check 3 months/ 250 hours
  • Change 12 months/ 1000 hours
  • AV 120 X, Cummins Tier 2
  • Drum drive
  • Use: Normal
  • Capacity 2,5 liter
  • Check 3 months/ 250 hours
  • Change 12 months/ 1000 hours
  • AV 130 X, Cummins Tier 3
  • Drum drive
  • Use: Normal
  • Capacity 3 liter
  • Check 3 months/ 250 hours
  • Change 12 months/ 1000 hours
  • AV 70 X, Cummins Tier 2
  • Drum drive
  • Use: Normal
  • Capacity 1,4 liter
  • Check 3 months/ 250 hours
  • Change 12 months/ 1000 hours
  • AV 70 X, Cummins Tier 3
  • Drum drive
  • Use: Normal
  • Capacity 1,4 liter
  • Check 3 months/ 250 hours
  • Change 12 months/ 1000 hours

Additional Notes

  • The Ammann Articulated tandem rollers, AV automatic transmission fluid capacity for the transmission and drum drive circuit ranges from 1.4 liters on the AV 70 X up to 3 liters on the AV 130 X, reflecting the mechanical scale differences across the roller lineup.
  • The AV 70 X in both Cummins Tier 2 and Tier 3 configurations shares an identical 1.4-liter transmission and drum drive capacity, meaning the emission tier designation carries no influence on fluid volume for the smaller roller class.
  • The AV 110 X with Cummins Tier 3 and the AV 120 X with Cummins Tier 2 both specify a 2.5-liter capacity for the transmission and drum drive, despite representing different engine tiers and model designations.
  • The AV 130 X with Cummins Tier 3 holds a 3-liter automatic transmission fluid capacity, which is the largest among all listed configurations and is associated with the transmission and drum drive circuit.
  • All five configurations share a uniform check interval of every 3 months or 250 hours under normal use conditions, whichever comes first, applied to the transmission and drum drive fluid level.
  • The fluid change interval across all listed AV configurations is set at 12 months or 1,000 hours under normal use conditions, a schedule that applies equally regardless of engine tier or roller size.
  • The dual-format interval structure, expressing service points in both calendar months and operating hours, accommodates machines that may accumulate hours at varying rates depending on seasonal or project-based workloads.

Other Systems