Wolseley 15/60, 16/60

Manual transmission fluid capacity & service interval

Wolseley 15/60 and 16/60 models require manual transmission fluid with a capacity of 2,56 liters. Service intervals include checks at 1500 km and changes at 800 km or 9000 km. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
16/60 (1961-1971)
  • Use: Normal
  • Capacity 2,56 liter
  • Check 1500 km
  • Change 9000 km
  • Code: 4/1
16/60 (1961-1971)
  • Use: Initial service
  • Capacity 2,56 liter
  • Change 800 km
  • Code: 4/1
15/60 (1958-1961)
  • Use: Normal
  • Capacity 2,56 liter
  • Check 1500 km
  • Change 9000 km
  • Code: 4/1

Additional Notes

  • The Wolseley 15/60 and 16/60 share an identical manual transmission fluid capacity of 2.56 liters, which represents the service fill volume used during routine fluid changes.
  • Under normal use conditions, the 15/60 (1958-1961) calls for a fluid level check at every 1,500 km, with a full fluid change interval set at 9,000 km.
  • The 16/60 (1961-1971) carries the same normal-use check and change intervals as the 15/60, with a level check at 1,500 km and a full change at 9,000 km.
  • An initial service interval applies specifically to the 16/60, requiring a fluid change at just 800 km. An early change at this mileage is standard practice for breaking in transmission components, as it removes metal particles and contaminants generated during initial wear-in.
  • The 2.56-liter capacity figure remains constant across both the normal and initial service rows for the 16/60, indicating the same fluid volume applies regardless of whether the change is a break-in service or a routine interval change.

Other Systems