Wolseley 15/60, 16/60
Differential fluid capacity & service interval
Wolseley 15/60 and 16/60 models require 1,28 liters of differential fluid. Service intervals include checking at 1500 km and changing at 9000 km. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
Additional Notes
- The Wolseley 15/60 and 16/60 share an identical rear differential fluid capacity of 1.28 liters, which represents a service fill volume typical of a compact rear axle housing rather than a full overhaul quantity.
- Both the 15/60 (1958-1961) and 16/60 (1961-1971) specify a fluid check interval of 1,500 km under normal use conditions, reflecting a relatively short inspection cycle consistent with maintenance practices of that era.
- The fluid change interval for both configurations is set at 9,000 km under normal use conditions, a figure that applies uniformly across the entire production span covered by the two variants.
- The 1,500 km check interval paired with the 9,000 km change interval means the rear differential fluid level is inspected six times between each scheduled drain, indicating a maintenance schedule structured around frequent monitoring rather than infrequent servicing.
- The specifications carry no differentiation between the 15/60 and 16/60 in terms of differential capacity or service intervals, meaning the transition from one model to the other in 1961 introduced no change to rear axle fluid servicing requirements.