Volkswagen (VW) Kübelwagen, Type 82/181 (EU)
Manual transmission fluid capacity & service interval
Volkswagen Kübelwagen, Type 82/181 (EU) manual transmission fluid capacity ranges from 2,5 to 3 liters. Service intervals include checks at 5000 km and 10000 km, with fluid changes at 20000 km and 25000 km. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 181 (Kurierwagen) 1500 (1969-1980) |
|
| 181 (Kurierwagen) 1600 (1969-1980) |
|
| Kübelwagen, Type 82 (1943-1945) |
|
| Kübelwagen, Type 82 (1940-1943) |
|
Additional Notes
- The Volkswagen (VW) Kübelwagen Type 82 transaxle carries a dry fill capacity of 3 liters, which represents the total fluid volume required when filling a completely drained or newly assembled unit from empty.
- The service fill capacity on the Type 82 transaxle is 2,5 liters, a lower figure that accounts for residual fluid remaining in the unit during a standard drain-and-refill service.
- Both the 1940-1943 and 1943-1945 Type 82 variants share identical transaxle capacities of 3 liters dry and 2,5 liters service fill, with a check interval of 10000 km and a change interval of 20000 km under normal use conditions.
- The 181 Kurierwagen, available in both 1500 and 1600 engine configurations from 1969-1980, specifies only a single 2,5-liter capacity figure with no separate dry fill value listed, indicating the specification applies to service fill only.
- The 181 Kurierwagen transaxle fluid check interval of 5000 km is notably shorter than the 10000 km check interval specified for the Type 82, despite both units sharing the same 2,5-liter service fill capacity.
- The Type 82 transaxle fluid change interval of 20000 km under normal use conditions is shorter than the 25000 km change interval specified for the 181 Kurierwagen under the same normal use condition.
- Both the 1500 and 1600 engine variants of the 181 Kurierwagen carry identical transaxle fluid specifications across capacity, check interval, and change interval, indicating no differentiation between the two engine configurations for this system.