Volkswagen (VW) Lupo (EU)

Automatic transmission fluid capacity & service interval

Volkswagen Lupo (EU) automatic transmission fluid capacity ranges from 2,5 liters to 5,7 liters. Service intervals include 60000 km and 12 months/30000 km. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Lupo 1.4 16V (55 kW) (2003-2005)
  • Use: Normal
  • Capacity 5,7 liter
  • Check 60000 km
  • Code: 4/1
Lupo 3L 1.2 TDI (2003-2005)
  • Use: Normal
  • Capacity 2,5 liter
  • Check 12 months/ 30000 km
  • Code: 085 DS 5/1
Lupo 1.4 16V FSI (2000-2004)
  • Use: Normal
  • Capacity 2,7 liter
  • Code: 085 DS 5/1
Lupo 3L 1.2 TDI (1999-2003)
  • Use: Normal
  • Capacity 2,5 liter
  • Check 12 months/ 30000 km
  • Code: 085 DS 5/1
Lupo 1.4 16V (55 kW) (1998-2003)
  • Use: Normal
  • Capacity 5,7 liter
  • Check 60000 km
  • Code: 4/1

Additional Notes

  • The Volkswagen Lupo (EU) automatic transmission fluid specifications cover two distinct transaxle types across the model range: a fully automatic transaxle rated at 5.7 liters and a semi-automatic transaxle appearing in two separate configurations at lower capacities.
  • The 5.7-liter capacity listed for the Lupo 1.4 16V (55 kW) automatic transaxle is notably higher than the semi-automatic figures, which is consistent with fully automatic units requiring a larger fluid volume to supply the torque converter, valve body, and hydraulic circuits.
  • The Lupo 1.4 16V FSI (2000-2004) semi-automatic transaxle carries a capacity of 2.7 liters, while the Lupo 3L 1.2 TDI semi-automatic transaxle holds 2.5 liters, placing the two semi-automatic configurations within 0.2 liters of each other despite differing engine types.
  • The Lupo 1.4 16V (55 kW) in both its 1998-2003 and 2003-2005 forms shares an identical specification of 5.7 liters capacity and a 60,000 km check interval under normal use conditions, indicating no revision to the automatic transaxle service parameters across the production split.
  • The Lupo 3L 1.2 TDI semi-automatic transaxle carries a dual-format check interval of 12 months or 30,000 km under normal use, whichever comes first. A time-based interval alongside a distance-based one reflects that fluid degradation can occur through calendar aging even at low mileage.
  • The 30,000 km check interval on the Lupo 3L 1.2 TDI is half the 60,000 km interval specified for the Lupo 1.4 16V (55 kW) automatic transaxle, meaning the semi-automatic diesel configuration requires attention at a significantly shorter distance cycle.
  • The Lupo 1.4 16V FSI (2000-2004) semi-automatic transaxle specification lists only a capacity of 2.7 liters with no check interval recorded, whereas the Lupo 3L 1.2 TDI semi-automatic entries include both a capacity and a defined service interval.

Other Systems