Volkswagen (VW) Caddy Kombi, 2C (EU)

Transfer case fluid capacity & service interval

Volkswagen Caddy Kombi, 2C (EU) requires transfer case fluid with a capacity of 0,9 liter. Service intervals include checks at 48 months/60000 km and 24 months/30000 km. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Caddy Combi 2.0 TDI (103 kW) 4Motion DPF (2010-2015)
  • Angle gearbox
  • Use: Normal
  • Capacity 0,9 liter
  • Check 48 months/ 60000 km
  • Caddy Combi 2.0 TDI (62 kW) 4Motion DPF (2010-2015)
  • Angle gearbox
  • Use: Normal
  • Capacity 0,9 liter
  • Check 24 months/ 30000 km
  • Caddy Combi 2.0 TDI (81 kW) 4Motion DPF (2010-2015)
  • Angle gearbox
  • Use: Normal
  • Capacity 0,9 liter
  • Check 24 months/ 30000 km

Additional Notes

  • All three Volkswagen Caddy Kombi 2C 4Motion configurations covered in the 2010-2015 range share an identical transfer case fluid capacity of 0.9 liter, which is a relatively small volume consistent with a compact angle gearbox or transferbox unit rather than a larger dedicated transfer case assembly.
  • The 0.9 liter figure represents a service fill capacity, meaning the amount of fluid the unit holds during normal operation, as opposed to a larger overhaul or dry-fill quantity that would account for passages and components drained during a full disassembly.
  • The 2.0 TDI 103 kW 4Motion variant carries a check interval of 48 months or 60,000 km under normal use conditions, which is notably longer than the intervals assigned to the other two power outputs in the same model range.
  • The 2.0 TDI 62 kW and 2.0 TDI 81 kW 4Motion variants both share a check interval of 24 months or 30,000 km under normal use conditions, placing them on a schedule twice as frequent as the 103 kW variant despite holding the same 0.9 liter fluid capacity.
  • The divergence in check intervals across three engines sharing the same fluid capacity and the same angle gearbox or transferbox designation suggests the service schedule is tied to powertrain output characteristics rather than unit size or fluid volume alone.
  • All three configurations specify a fluid check rather than a fluid change at the stated intervals, meaning the service action involves inspecting the fluid level and condition rather than a mandatory full drain and refill at each interval.

Other Systems