Volkswagen (VW) Caddy Kombi, 2C (EU)

Automatic transmission fluid capacity & service interval

Volkswagen Caddy Kombi, 2C (EU) automatic transmission fluid capacity ranges from 1,7 to 7,2 liters. Service intervals include checks at 48 months or 60000 km, and changes at 60000 km or 48 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Caddy Combi 2.0 TDI (125 kW) DPF (2012-2015)
  • Use: Normal
  • Capacity 7,2 liter (Dry fill)
  • Capacity 5,2 liter (Service fill)
  • Capacity 3-4 liter (Mechatronic Only)
  • Change 60000 km
  • Code: DSG 02E (DQ250) 6/1
Caddy Combi 1.6 TDI (75 kW) DPF (2010-2015)
  • Use: Normal
  • Capacity 1,7 liter
  • Check 48 months/ 60000 km
  • Code: DSG 0AM (DQ200) 7/1
Caddy Combi 2.0 TDI (103 kW) 4Motion DPF (2010-2015)
  • Use: Normal
  • Capacity 7,2 liter (Dry fill)
  • Capacity 5,2 liter (Service fill)
  • Capacity 3-4 liter (Mechatronic Only)
  • Change 60000 km/ 48 months
  • Code: DSG 02E (DQ250) 6/1
Caddy Combi 2.0 TDI (103 kW) DPF (2010-2015)
  • Use: Normal
  • Capacity 7,2 liter (Dry fill)
  • Capacity 5,2 liter (Service fill)
  • Capacity 3-4 liter (Mechatronic Only)
  • Change 60000 km
  • Code: DSG 02E (DQ250) 6/1

Additional Notes

  • The Volkswagen (VW) Caddy Kombi 2C 1.6 TDI (75 kW) carries a single capacity figure of 1.7 liters, which reflects a transaxle semi-automatic unit with no separate dry fill or service fill distinction in the specifications.
  • The 2.0 TDI variants list a dry fill capacity of 7.2 liters, representing the total fluid volume required when filling a completely drained or newly assembled transmission, such as after a full overhaul or unit replacement.
  • A service fill capacity of 5.2 liters applies to the 2.0 TDI configurations, accounting for the residual fluid that remains in the torque converter and passages during a standard drain-and-refill procedure.
  • A Mechatronic Only capacity of 3-4 liters is listed for the 2.0 TDI variants, indicating the fluid volume associated specifically with servicing the mechatronic unit, which is the integrated electro-hydraulic control assembly within the transmission.
  • The 1.6 TDI (75 kW) specifies a check interval rather than a change interval, set at 48 months or 60,000 km under normal use conditions, meaning the fluid level is to be inspected rather than replaced on that schedule.
  • The 2.0 TDI (103 kW) 4Motion DPF variant carries a fluid change interval of 60,000 km or 48 months under normal use, pairing both a distance and a time limit to the service requirement.
  • The 2.0 TDI (103 kW) DPF without 4Motion specifies a change interval of 60,000 km under normal use, with no accompanying month-based interval listed in the specifications.
  • The 2.0 TDI (125 kW) DPF, available from 2012-2015, shares the same capacity figures and 60,000 km change interval as the lower-output 103 kW DPF variant, despite the difference in power output.

Other Systems