Vauxhall Cresta

Automatic transmission fluid capacity & service interval

Vauxhall Cresta requires automatic transmission fluid with a capacity of 2,27 liters. Service intervals include checking every 10000 km or 3 months and changing every 20000 km or 6 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Cresta 3.3, PC (1965-1972)
  • Use: Normal
  • Capacity 2,27 liter (Service fill)
  • Check 10000 km/ 3 months
  • Change 20000 km/ 6 months
  • Code: GM Powerglide 2 2/1
Cresta 3.3, PB (1962-1965)
  • Use: Normal
  • Capacity 2,27 liter (Service fill)
  • Check 10000 km/ 3 months
  • Change 20000 km/ 6 months
  • Code: GM Powerglide 2 2/1

Additional Notes

  • The Vauxhall Cresta automatic transmission service fill capacity is 2.27 liters across both the PB and PC variants, a figure that reflects a partial fluid replenishment rather than a full drain and refill of the entire transmission circuit.
  • A service fill capacity, as opposed to a total or overhaul fill, accounts only for the fluid volume accessible through a standard drain procedure, meaning the torque converter retains a portion of fluid that is not displaced during routine servicing.
  • The 3.3 PB (1962-1965) and the 3.3 PC (1965-1972) share an identical service fill capacity of 2.27 liters, indicating no change in the automatic transmission fluid volume requirement between the two body generations.
  • The check interval for automatic transmission fluid on both configurations is set at 10,000 km or 3 months under normal use conditions, whichever comes first.
  • The fluid change interval is specified at 20,000 km or 6 months under normal use conditions, placing the change frequency at exactly double the check interval in both distance and time terms.
  • The time-based component of the change interval, at 6 months, reflects a maintenance philosophy common to mid-20th century vehicles where calendar aging of fluid was considered as significant as mileage accumulation.
  • Both the PB and PC Cresta specifications carry a normal use condition designation, meaning the stated intervals apply to standard operating environments rather than demanding or high-stress driving cycles.

Other Systems