Vauxhall Crossland
Automatic transmission fluid capacity & service interval
Vauxhall Crossland automatic transmission fluid has a capacity range of 3 to 7 liters. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Crossland 1.2 Turbo (81 kW) (2020- ) |
|
| Crossland 1.2 Turbo (96 kW) (2020- ) |
|
| Crossland 1.5 Diesel (88 kW) (2020-2023) |
|
Additional Notes
- The Vauxhall Crossland automatic transaxle carries a dry fill capacity of 7 liters across all three configurations covered here, spanning the 1.2 Turbo 81 kW, 1.2 Turbo 96 kW, and 1.5 Diesel 88 kW variants for the 2020 onward and 2020-2023 model years respectively.
- A dry fill capacity of 7 liters reflects the total fluid volume required when filling a completely drained or newly assembled transmission, such as after a full overhaul or unit replacement.
- The service fill capacity is 3 liters across all three configurations, representing the partial volume exchanged during a routine fluid service where residual fluid remains in the torque converter and passages.
- The difference between the 7-liter dry fill and the 3-liter service fill indicates that approximately 4 liters of fluid is retained within the transaxle assembly during a standard drain-and-fill procedure.
- All three configurations specify normal use conditions, meaning the 3-liter service fill figure applies to vehicles operated under standard driving circumstances rather than severe or demanding duty cycles.
- The 1.5 Diesel 88 kW variant shares identical automatic transaxle fluid capacities with both 1.2 Turbo variants, suggesting a common transmission unit is used across petrol and diesel drivetrains in the Crossland lineup for the covered years.