Toyota C-HR (EU)

Transfer case fluid capacity & service interval

Toyota C-HR (EU) transfer case fluid capacity ranges from 0,4 to 0,5 liter. Service intervals require a change every 30000 km or 48 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
C-HR 1.2T 4WD (2019-2020)
  • Use: Normal
  • Capacity 0,45 liter
  • Change 30000 km/ 48 months
  • Code: GF1A
C-HR 1.2T 4WD (2016-2019)
  • Use: Normal
  • Capacity 0,4-0,5 liter
  • Change 30000 km/ 48 months
  • Code: GF1A

Additional Notes

  • The Toyota C-HR 1.2T 4WD produced from 2016 to 2019 carries a transfer case fluid capacity listed as a range of 0.4 to 0.5 liter, which reflects a service fill tolerance rather than a single fixed volume, allowing for minor variation during the refill process.
  • The 2019-2020 C-HR 1.2T 4WD narrows the transfer case capacity to a single fixed value of 0.45 liter, placing it within the middle of the earlier range and indicating a more precisely defined fill specification for that production period.
  • Both the 2016-2019 and 2019-2020 configurations share an identical change interval of 30,000 km or 48 months under normal use conditions, meaning whichever threshold is reached first would govern the service timing.
  • A 48-month interval tied to a 30,000 km distance limit means that lower-mileage vehicles still require a fluid change after four years regardless of how little distance has been covered under normal use conditions.
  • The transfer case fluid volume across both configurations falls well below one liter, which is characteristic of compact transfer units where the fluid reservoir is small and precise fill levels carry proportionally greater significance.

Other Systems