Toyota C-HR (EU)
Manual transmission fluid capacity & service interval
Toyota C-HR (EU) manual transmission fluid capacity is 2,4 liters. Service intervals include checking every 48 months or 60000 km and changing every 60000 km or 48 months. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| C-HR 1.2T 2WD (2019-2020) |
|
| C-HR 1.2T 2WD (2019-2020) |
|
| C-HR 1.2T 2WD (2016-2019) |
|
| C-HR 1.2T 2WD (2016-2019) |
|
| C-HR 1.2T 2WD (2016-2019) |
|
| C-HR 1.2T 2WD (2016-2019) |
|
Additional Notes
- The Toyota C-HR (EU) 1.2T 2WD manual transaxle holds 2.4 liters of fluid across all model years covered in the specifications, from 2016 through 2020.
- A 2.4-liter capacity for a front-wheel-drive manual transaxle is a typical service fill volume, meaning the figure reflects the amount needed to bring the unit to its correct operating level rather than a full overhaul or dry-fill quantity.
- Under normal use conditions, the 2016-2019 C-HR 1.2T 2WD manual transaxle fluid is subject to a check interval of 48 months or 60,000 km, whichever comes first, rather than a scheduled change.
- Under severe use conditions, the same 2016-2019 configuration requires a fluid change at 60,000 km or 48 months, a distinction that moves the service action from inspection to full replacement compared to the normal use schedule.
- The 2019-2020 C-HR 1.2T 2WD manual transaxle carries the same normal-use check interval of 48 months or 60,000 km as the preceding 2016-2019 variant, with no change in the threshold values between the two model year groups.
- For the 2019-2020 variant under severe conditions, the fluid change interval remains at 60,000 km or 48 months, matching the severe-use schedule specified for the 2016-2019 configuration.