Tata Harrier

Coolant capacity & service interval

Tata Harrier coolant capacity is 7 liters. Service intervals include checks at 15000 km or 12 months and changes at 60000 km or 36 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Harrier 2.0 TD (125 kW) DPF (2020- )
  • Use: Normal
  • Capacity 7 liter
  • Check 15000 km/ 12 months
  • Change 60000 km/ 36 months
Harrier 2.0 TD (103 kW) DPF (2018-2020)
  • Use: Normal
  • Capacity 7 liter
  • Check 15000 km/ 12 months
  • Change 60000 km/ 36 months

Additional Notes

  • The Tata Harrier 2.0 TD (103 kW) DPF carries a cooling system capacity of 7 liters, which represents the total system fill volume including the radiator, hoses, and reservoir.
  • The 2.0 TD (125 kW) DPF variant also holds 7 liters of coolant, matching the capacity of the lower-output 103 kW engine despite the difference in power output.
  • Both engine variants share a coolant check interval of every 15,000 km or 12 months under normal use conditions, whichever comes first.
  • The coolant change interval for both variants is set at 60,000 km or 36 months under normal use conditions, meaning a full drain and refill of the 7-liter system is due at that point.
  • The gap between the check interval (15,000 km / 12 months) and the change interval (60,000 km / 36 months) means the cooling system is inspected approximately four times before a full fluid replacement is due.

Other Systems