Tata Harrier

Brake fluid capacity & service interval

Tata Harrier uses brake fluid with a capacity of 0,71 liter. Service intervals include checking at 15000 km or 12 months and changing at 45000 km or 24 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Harrier 2.0 TD (125 kW) DPF (2020- )
  • Use: Normal
  • Capacity 0,71 liter
  • Check 15000 km/ 12 months
  • Change 45000 km/ 24 months
Harrier 2.0 TD (103 kW) DPF (2018-2020)
  • Use: Normal
  • Capacity 0,71 liter
  • Check 15000 km/ 12 months
  • Change 45000 km/ 24 months

Additional Notes

  • The Tata Harrier's hydraulic brake/clutch system holds a capacity of 0.71 liter, a figure that reflects the combined fluid volume serving both the braking and clutch circuits through a shared reservoir arrangement.
  • The 2.0 TD (103 kW) DPF variant, covering 2018-2020, carries a brake fluid check interval of every 15,000 km or 12 months, whichever comes first under normal use conditions.
  • A change interval of 45,000 km or 24 months applies to the 103 kW variant under normal use, meaning fluid replacement occurs roughly every third check cycle.
  • The 2.0 TD (125 kW) DPF variant, introduced from 2020, shares the identical 0.71 liter capacity with the lower-output 103 kW engine, indicating no change in system volume between the two power outputs.
  • The 125 kW variant also carries the same check and change intervals as the 103 kW model, with inspections at 15,000 km or 12 months and full fluid replacement at 45,000 km or 24 months under normal conditions.
  • A 24-month maximum change interval for brake fluid reflects the hygroscopic nature of brake fluid, which absorbs moisture over time and lowers the boiling point of the fluid regardless of mileage accumulated.

Other Systems