Talbot Horizon
Manual transmission fluid capacity & service interval
Talbot Horizon manual transmission fluid capacity ranges from 1,55 to 2 liters. Service intervals include a check every 5000 km. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Horizon 1.1 (1985-1987) |
|
| Horizon 1.4 (1985-1987) |
|
| Horizon 1.9 D (1984-1987) |
|
| Horizon Premium (1984-1987) |
|
| Horizon 1.1 (1980-1984) |
|
| Horizon 1.4 (1980-1984) |
|
Additional Notes
- All six configurations listed cover the manual transaxle, meaning the transmission and front-wheel-drive differential share a single fluid sump rather than being serviced as separate units.
- The Talbot Horizon 1.1 and 1.4 variants from 1980-1984 share a fixed transaxle capacity of 1.55 liters, indicating a single defined fill volume with no range tolerance published for those years.
- From 1985-1987, both the 1.1 and 1.4 engine variants carry a capacity range of 1.55-2 liters, reflecting a wider acceptable fill window that may account for variation between drain-and-refill service fills and fuller overhaul quantities.
- The Horizon 1.9 D from 1984-1987 shares the 1.55-2 liter capacity range with the later petrol variants, despite being a diesel engine configuration paired with the same transaxle family.
- The Horizon 1.9 D is the only configuration listed with a "filled for life" use condition, which designates the fluid as factory-sealed with no scheduled drain interval, though a 5,000 km level check interval is still specified, distinguishing a fluid level inspection from a full fluid change.
- The Horizon Premium from 1984-1987 carries the same 1.55-2 liter transaxle capacity as the other mid-to-late production variants and is listed under normal use conditions, placing no special service designation on the trim-level variant.