Talbot Horizon
Coolant capacity & service interval
Talbot Horizon coolant capacity ranges from 6 to 6,2 liters. The service interval for coolant is 24 months. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Horizon 1.1 (1985-1987) |
|
| Horizon 1.4 (1985-1987) |
|
| Horizon 1.9 D (1984-1987) |
|
| Horizon Premium (1984-1987) |
|
| Horizon 1.1 (1980-1984) |
|
| Horizon 1.4 (1980-1984) |
|
Additional Notes
- Across the Talbot Horizon range, the standard cooling system capacity of 6 liters applies to the 1.1, the 1.4 with manual transmission, and the Premium variant, spanning model years 1980-1987.
- The Horizon 1.4 equipped with an automatic transmission carries a slightly larger coolant capacity of 6.2 liters, compared to the 6-liter figure for the manual transmission version. The additional volume accounts for the transmission fluid cooler circuit typically integrated into the radiator on automatic-equipped vehicles.
- The 1.4 automatic transmission capacity difference of 0.2 liters applies consistently across both the 1980-1984 and 1985-1987 model year groupings, indicating no change to the cooling system volume between those two periods.
- The Horizon 1.9 D shares the 6.2-liter coolant capacity with the 1.4 automatic, though in the diesel variant this larger volume reflects the greater thermal load produced by diesel combustion rather than an automatic transmission circuit.
- A coolant change interval of 24 months is specified for the Horizon 1.9 D (1984-1987). No equivalent interval figure appears in the specifications for the petrol-engined variants.
- The 24-month coolant change interval on the 1.9 D is listed under normal use conditions, meaning the interval applies to standard operating environments rather than elevated-stress or severe-duty cycles.
- The 1.1 engine retains an identical 6-liter cooling system capacity across both the 1980-1984 and 1985-1987 periods, with no variation between the two production phases recorded in the specifications.