Tagaz Tager

Transfer case fluid capacity & service interval

Tagaz Tager transfer case fluid capacity ranges from 1,2 to 1,4 liters. Service intervals include normal use. Data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Tager 2.3 16V (2008-2014)
  • Use: Normal
  • Capacity 1,2-1,4 liter
  • Code: (4x4)
Tager 2.6 D (2008-2014)
  • Use: Normal
  • Capacity 1,2-1,4 liter
  • Code: (4x4)
Tager 2.9 TD (2008-2014)
  • Use: Normal
  • Capacity 1,2-1,4 liter
  • Code: (4x4)
Tager 3.2 V6 (2008-2014)
  • Use: Normal
  • Capacity 1,2-1,4 liter
  • Code: (4x4)

Additional Notes

  • The Tagaz Tager transfer case fluid capacity is specified as a range of 1.2 to 1.4 liters across all four engine variants available from 2008-2014.
  • A capacity expressed as a range rather than a fixed value typically reflects the tolerance built into the fill procedure, where the actual accepted volume depends on the fluid level relative to the fill port.
  • The 2.3 16V, 2.6 D, 2.9 TD, and 3.2 V6 engine variants all share the identical transfer case fluid capacity specification of 1.2-1.4 liters, indicating a common transfer case unit across the lineup.
  • All four configurations carry a normal use condition designation, meaning the specified capacity applies to standard operating circumstances rather than severe-duty or first-fill scenarios.
  • The transfer case in all listed variants is identified specifically as a transferbox, which in service terminology refers to the mechanical unit distributing torque between the front and rear axles in a four-wheel-drive system.

Other Systems