Tagaz Tager

Differential fluid capacity & service interval

The Tagaz Tager uses differential fluid with a capacity ranging from 1.2 to 1.9 liters depending on the configuration. The data covers 12 different configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Tager 2.3 16V (2008-2014)
  • Front
  • Use: Normal
  • Capacity 1,2 liter
  • Tager 2.3 16V (2008-2014)
  • Rear
  • Use: Normal
  • Capacity 1,9 liter
  • Tager 2.3 16V (2008-2014)
  • Rear, limited slip
  • Use: Normal
  • Capacity 1,9 liter
  • Tager 2.6 D (2008-2014)
  • Front
  • Use: Normal
  • Capacity 1,2 liter
  • Tager 2.6 D (2008-2014)
  • Rear
  • Use: Normal
  • Capacity 1,9 liter
  • Tager 2.6 D (2008-2014)
  • Rear, limited slip
  • Use: Normal
  • Capacity 1,9 liter
  • Tager 2.9 TD (2008-2014)
  • Front
  • Use: Normal
  • Capacity 1,2 liter
  • Tager 2.9 TD (2008-2014)
  • Rear
  • Use: Normal
  • Capacity 1,9 liter
  • Tager 2.9 TD (2008-2014)
  • Rear, limited slip
  • Use: Normal
  • Capacity 1,9 liter
  • Tager 3.2 V6 (2008-2014)
  • Front
  • Use: Normal
  • Capacity 1,2 liter
  • Tager 3.2 V6 (2008-2014)
  • Rear
  • Use: Normal
  • Capacity 1,9 liter
  • Tager 3.2 V6 (2008-2014)
  • Rear, limited slip
  • Use: Normal
  • Capacity 1,9 liter

Additional Notes

  • The Tagaz Tager front differential holds 1.2 liters of fluid across all four engine variants — the 2.3 16V, 2.6 D, 2.9 TD, and 3.2 V6 — covering the full 2008-2014 model range.
  • The rear differential capacity is rated at 1.9 liters for all engine configurations in the 2008-2014 range, which is 0.7 liters more than the front differential fill volume.
  • The limited slip rear differential shares the same 1.9-liter capacity as the standard rear differential across all four engine variants, meaning the limited slip clutch pack assembly does not alter the total fluid volume required.
  • A 1.2-liter front differential fill is a relatively modest volume, consistent with compact front axle housings found on body-on-frame SUVs where the front differential is a standalone unit rather than integrated with a transaxle.
  • The 1.9-liter rear differential capacity is a typical figure for a solid rear axle differential housing on a mid-size four-wheel-drive vehicle, where the larger ring-and-pinion assembly requires a greater fluid volume for adequate lubrication.
  • All specifications across every engine variant and differential position are designated for normal use conditions, with no separate severe-use interval or capacity listed in the data.
  • The consistency of differential fluid capacities across the 2.3 16V, 2.6 D, 2.9 TD, and 3.2 V6 engines indicates a shared axle architecture regardless of powertrain choice within the 2008-2014 production span.

Other Systems