Subaru Legacy / Outback, BE, BH, BT (EU)
Power steering fluid capacity & service interval
Subaru Legacy / Outback, BE, BH, BT (EU) models require power steering fluid with a capacity of 0,7 liter. Service intervals consist of checks every 25000 km or 12 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Legacy / Outback 2.0 (1998-2004) |
|
| Legacy / Outback 2.0 4WD (1998-2004) |
|
| Legacy / Outback 2.5 4WD (1998-2004) |
|
Additional Notes
- Across all three configurations of the Subaru Legacy / Outback BE, BH, BT (EU) covered here, the power steering system capacity is uniformly rated at 0.7 liter, which is a typical figure for a rack-and-pinion or recirculating ball power steering reservoir fill on a passenger car of this era.
- The 0.7 liter figure represents a service fill capacity, meaning the volume expected when topping up or replacing fluid in normal maintenance, rather than a full system overhaul volume that would account for fluid retained in lines and the steering gear itself.
- The 2.0 non-4WD and 2.5 4WD variants both carry a stated inspection interval of every 25,000 km or 12 months, whichever comes first, under normal use conditions.
- The 25,000 km / 12-month check interval is tied specifically to the normal use condition, meaning it applies to standard driving environments rather than severe or demanding operating conditions.
- The Legacy / Outback 2.0 4WD configuration shares the same 0.7 liter capacity as the other variants but does not carry a listed inspection interval in the specifications provided here.
- The capacity figure of 0.7 liter is consistent across the 2.0, 2.0 4WD, and 2.5 4WD variants for the 1998-2004 model years, indicating no variation in power steering reservoir size between the two-wheel drive and four-wheel drive drivetrains or between the two engine displacements.