Subaru Legacy / Outback, BE, BH, BT (EU)
Manual transmission fluid capacity & service interval
Subaru Legacy / Outback, BE, BH, BT (EU) manual transmission fluid capacity ranges from 3,3 to 3,5 liters. Service intervals occur every 50000 km or 24 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Legacy / Outback 2.0 (1998-2004) |
|
|
|
|
|
Additional Notes
- The front-wheel-drive Subaru Legacy / Outback 2.0 (BE/BH/BT, EU) carries a manual transaxle fluid capacity of 3.3 liters, which reflects a standard single-unit transaxle fill without an integrated transfer mechanism.
- Both the 2.0 4WD and 2.5 4WD variants share a higher capacity of 3.5 liters, accounting for the combined transaxle and transfer box volume serviced as a single fill.
- The 0.2-liter difference between the front-wheel-drive 2.0 and the 4WD configurations is directly attributable to the transfer box component noted in the 4WD specifications.
- All three configurations across the 1998-2004 model range share an identical service interval of 50,000 km or 24 months under normal use conditions, whichever comes first.
- The 24-month time limit alongside the 50,000 km distance interval means fluid age is treated as an independent service trigger, not solely mileage accumulation.
- The 2.0 and 2.5 4WD variants carry the same 3.5-liter capacity, indicating the transaxle and transfer box assembly volume is consistent regardless of engine displacement in the 4WD lineup.