Saturn L series (USA / CAN)

Additional Notes

• Across all listed Saturn L Series configurations from 2000-2005, the automatic transaxle fluid capacity is 6.5 liters, a figure consistent with a service fill rather than a full overhaul capacity, which would typically be higher due to fluid retained in the torque converter and valve body during a drain-and-fill procedure.
• The LS/L100 (USA) carries the 6.5-liter automatic transaxle capacity across its 2000-2002 model year span under normal use conditions, with no separate change interval listed in the specifications for that configuration.
• The LS1/LW1/L200/LW200 (USA) shares the same 6.5-liter transaxle capacity under normal use conditions and extends the production window through 2004, one year beyond the LS/L100.
• The Saturn L Series LS2/LW2/L300/LW300 (CAN) is the only configuration in the specifications that carries a defined change interval, set at 83,000 km under severe use conditions, alongside the same 6.5-liter capacity shared by all other listed variants.
• Severe use conditions, as referenced in the LS2/LW2/L300/LW300 (CAN) row, generally correspond to operating environments such as frequent towing, stop-and-go traffic, or extreme temperatures, which accelerate fluid degradation and justify the explicit 83,000 km interval tied to that entry.
• The LS2/LW2/L300/LW300 spans both the USA and CAN markets across 2000-2005, yet the two market entries differ in use condition classification, with the USA variant listed under normal use and the CAN variant listed under severe use, each retaining the same 6.5-liter capacity figure.