Renault Captur, J87 (EU)

Additional Notes

• The Renault Captur J87 (EU) manual transmission fluid specifications cover transaxle units, meaning the gearbox and final drive share a single fluid reservoir rather than being serviced as separate components.
• The Captur 1.5 dCi 90 DPF (2013-2018) carries a transaxle capacity of 2.4 liters under normal use conditions, which is the larger of the two capacity figures present across the listed configurations.
• The Captur TCe 90 (2013-2019) also specifies a 2.4-liter transaxle capacity under normal use conditions, matching the figure seen in the 1.5 dCi 90 DPF rather than the 2-liter figure associated with higher-output variants.
• The Captur 1.5 dCi 110 DPF (2014-2018) and the Captur TCe 130 PF (2018-2019) both specify a 2-liter transaxle capacity under normal use conditions, placing the higher-output diesel and the later petrol variant in the same capacity bracket.
• The 0.4-liter difference between the 2-liter and 2.4-liter transaxle capacities across configurations is a meaningful distinction at service time, as underfilling a transaxle can lead to inadequate lubrication of gear sets and bearings.
• All four configurations carry a normal use condition designation, meaning the stated capacities apply to standard operating environments rather than severe-duty cycles such as frequent towing or extreme temperature exposure.
• The TCe 130 PF entered the specification range in 2018, while the two dCi variants and the TCe 90 were present from earlier in the 2013-2019 window, reflecting a generational shift in the powertrain lineup toward the end of the covered period.