Renault Captur, J87 (EU)
Automatic transmission fluid capacity & service interval
Renault Captur, J87 (EU) automatic transmission fluid capacity ranges from 1,4 to 1,7 liters. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Captur TCe 150 PF (2018-2019) |
|
| Captur 1.5 dCi 90 DPF (2013-2018) |
|
| Captur TCe 120 (2013-2018) |
|
Additional Notes
- Across all three configurations listed, the Renault Captur J87 (EU) semi-automatic transaxle holds 1.7 liters on a dry fill, which represents the total fluid volume required when filling a completely drained or newly assembled unit.
- The service fill capacity of 1.4 liters is consistently lower than the dry fill across the 1.5 dCi 90 DPF, TCe 120, and TCe 150 PF configurations, reflecting the volume of fluid that remains in the transmission circuit even after a standard drain procedure.
- The 0.3-liter difference between dry and service fill capacities indicates that a routine fluid change does not fully evacuate the transaxle, as residual fluid stays in passages, the valve body, and other internal components.
- All three configurations share identical dry and service fill capacities despite spanning different engine types, covering both the diesel 1.5 dCi 90 DPF and the petrol TCe 120 and TCe 150 PF variants, which points to a common transaxle unit across the lineup.
- The 1.5 dCi 90 DPF and TCe 120 share the same 2013-2018 production window, while the TCe 150 PF carries a 2018-2019 range, making the latter the most recent configuration listed in the specifications.
- All capacity figures are listed under normal use conditions, meaning the 1.4-liter service fill applies to standard operating environments rather than severe-duty cycles.