Renault Avantime, D66 (EU)

Coolant capacity & service interval

Renault Avantime, D66 (EU) coolant capacity ranges from 10 liters. Service intervals include checks at 30000 km or 24 months and changes at 120000 km or 48 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Avantime 2.0 16V Turbo, D66 (2001-2003)
  • Use: Normal
  • Between min and max.
  • Check 30000 km/ 24 months
  • Change 120000 km/ 48 months
Avantime 2.2 dCi, D66 (2001-2003)
  • Use: Normal
  • Between min and max.
  • Check 30000 km/ 24 months
  • Change 120000 km/ 48 months
Avantime 3.0 V6 24V, D66 (2001-2003)
  • Use: Normal
  • Capacity 10 liter
  • Check 30000 km/ 24 months
  • Change 120000 km/ 48 months

Additional Notes

  • The Renault Avantime D66 coolant level specification for the 2.0 16V Turbo and 2.2 dCi variants is expressed as a range between the minimum and maximum reservoir marks rather than a fixed volume, meaning no discrete fill capacity is stated for those engines.
  • The 3.0 V6 24V is the only engine variant in the D66 lineup with a stated coolant system capacity, recorded at 10 liters, which represents the total cooling system volume.
  • A 10-liter cooling system capacity, as seen in the 3.0 V6 24V, is consistent with the larger thermal management demands of a six-cylinder engine compared to four-cylinder configurations.
  • Across all three engine variants covering the 2001-2003 model years, the coolant check interval is set at 30,000 km or 24 months under normal use conditions, whichever comes first.
  • The coolant change interval is identical across the 2.0 16V Turbo, 2.2 dCi, and 3.0 V6 24V variants, specified at 120,000 km or 48 months under normal use conditions.
  • The 48-month change interval means coolant in the Avantime D66 is rated for a four-year service life under normal conditions, which aligns with long-life coolant formulations that resist degradation of corrosion inhibitors over extended periods.
  • The check interval of 24 months falls at the midpoint of the 48-month change cycle, indicating a structured two-stage maintenance approach where the fluid is inspected before a full replacement is due.

Other Systems