Renault Austral, HHN (EU)

Manual transmission fluid capacity & service interval

Renault Austral, HHN (EU) manual transmission fluid capacity ranges from 1,35 to 1,9 liters. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Austral 1.3 TCe 140 PF (2024- )
  • Use: Normal
  • Capacity 1,9 liter (Initial Fill Gen 1)
  • Capacity 1,35 liter (Initial Fill Gen 2)
  • Code: TL4 6/1
Austral 1.2 TCe Mild Hybrid 130 PF (2023- )
  • Use: Normal
  • Capacity 1,9 liter (Initial Fill Gen 1)
  • Capacity 1,35 liter (Initial Fill Gen 2)
  • Code: TL4 6/1
Austral 1.3 TCe 140 PF (2023-2024)
  • Use: Normal
  • Capacity 1,9 liter (Initial Fill Gen 1)
  • Capacity 1,35 liter (Initial Fill Gen 2)
  • Code: TL4 6/1
Austral 1.2 TCe Mild Hybrid 130 PF (2022-2023)
  • Use: Normal
  • Capacity 1,9 liter (Initial Fill Gen 1)
  • Capacity 1,35 liter (Initial Fill Gen 2)
  • Code: TL4 6/1
Austral 1.3 TCe 140 PF (2022-2023)
  • Use: Normal
  • Capacity 1,9 liter (Initial Fill Gen 1)
  • Capacity 1,35 liter (Initial Fill Gen 2)
  • Code: TL4 6/1

Additional Notes

  • The Renault Austral HHN manual transaxle carries two distinct Initial Fill capacity values depending on the generation of the unit installed: 1.9 liters for Gen 1 and 1.35 liters for Gen 2.
  • An Initial Fill designation refers to the factory-installed fluid volume placed in the unit before the vehicle leaves production, rather than a service refill quantity used during a fluid change at a workshop.
  • The 0.55-liter difference between the Gen 1 and Gen 2 Initial Fill figures indicates a meaningful reduction in fluid volume between the two transaxle generations, which can affect how much fluid is required when a unit is replaced or rebuilt.
  • All five configurations across the 1.2 TCe Mild Hybrid 130 PF and 1.3 TCe 140 PF engine variants share identical capacity values for both Gen 1 and Gen 2, meaning the transaxle fluid specification does not vary between the petrol mild-hybrid and the standard petrol engine in the Austral HHN lineup.
  • The 1.2 TCe Mild Hybrid 130 PF variant carries the same Gen 1 and Gen 2 Initial Fill figures as the 1.3 TCe 140 PF, suggesting the manual transaxle assembly used across the Austral HHN range is shared regardless of whether mild-hybrid hardware is present.
  • All listed configurations are specified under normal use conditions, meaning the stated Initial Fill capacities apply to standard operating environments rather than severe-duty cycles.
  • The 1.3 TCe 140 PF engine appears across three separate model year entries — 2022-2023, 2023-2024, and starting from 2024 — each carrying the same 1.9-liter Gen 1 and 1.35-liter Gen 2 Initial Fill values throughout.

Other Systems