Peugeot Rifter, K9
Automatic transmission fluid capacity & service interval
Peugeot Rifter, K9 uses automatic transmission fluid with a capacity of 6 liters for dry fill and between 2.5 and 3.5 liters or 3.5 liters for service fill. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Rifter 1.2 PureTech 130, HNS (2018- ) |
|
| Rifter 1.5 BlueHDi 130, YHZ (2018- ) |
|
Additional Notes
- The Peugeot Rifter, K9 automatic transmission fluid specifications cover two engine variants from 2018, the 1.2 PureTech 130 with HNS transmission and the 1.5 BlueHDi 130 with YHZ transmission, both configured as transaxle automatics.
- A dry fill capacity of 6 liters applies to both the HNS and YHZ transaxles, reflecting the total fluid volume required when filling a completely drained or rebuilt unit from empty.
- The service fill capacity for the 1.5 BlueHDi 130 with YHZ transaxle is 3.5 liters under normal use conditions, representing the partial volume exchanged during a routine fluid service rather than a full overhaul.
- The 1.2 PureTech 130 with HNS transaxle carries a service fill range of 2.5 to 3.5 liters under normal use conditions, indicating a variable refill quantity that depends on how much fluid is drained during the service procedure.
- The gap between the 6-liter dry fill and the 2.5 to 3.5-liter service fill on the HNS transaxle reflects that a standard fluid change does not evacuate the entire system, as a portion of the fluid remains in the torque converter and valve body passages.
- Both variants share the same 6-liter dry fill figure despite differing in engine type, suggesting the transaxle housings hold an equivalent total fluid volume regardless of whether the application is petrol or diesel.