Peugeot Traveller

Automatic transmission fluid capacity & service interval

Peugeot Traveller automatic transmission fluid specifications cover capacities ranging from 1.9 to 7 liters depending on configuration. Four configurations are included in the data. Capacities include dry fill values of 2.2, 6.8, and 7 liters, and service fill values ranging from 1.9 to 4 liters.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Traveller 2.0 BlueHDI 145, EHS, EHT (2020-2022)
  • Use: Normal
  • Capacity 6,8 liter (Dry fill)
  • Capacity 3,5-4 liter (Service fill)
  • Code: AMN8 8/1
Traveller 2.0 BlueHDI 180, EHZ (2018-2022)
  • Use: Normal
  • Capacity 6,8 liter (Dry fill)
  • Capacity 3,5 liter (Service fill)
  • Code: AMN8 8/1
Traveller 1.6 BlueHDI 95, BHS, BHV (2016-2018)
  • Use: Normal
  • Capacity 2,2 liter (Dry fill)
  • Capacity 1,9 liter (Service fill)
  • Code: MCP 6/1
Traveller 2.0 BlueHDI 180, AHH (2016-2018)
  • Use: Normal
  • Capacity 7 liter (Dry fill)
  • Capacity 3-4 liter (Service fill)
  • Code: AM6 6/1

Additional Notes

  • The Peugeot Traveller 1.6 BlueHDI 95 carries a dry fill capacity of 2.2 liters and a service fill of 1.9 liters in a semi-automatic transaxle configuration, making the gap between the two figures notably small compared to the larger automatic units in the same model range.
  • A dry fill capacity represents the total fluid volume required when a transmission is completely empty, such as after a full rebuild or replacement, while a service fill reflects the smaller volume needed when residual fluid remains in the torque converter and passages during a routine fluid change.
  • The 2.0 BlueHDI 180 with engine code AHH, covering 2016-2018, has a dry fill capacity of 7 liters, the highest recorded across all Traveller automatic transmission configurations in the specifications.
  • The 2.0 BlueHDI 145 (EHS, EHT) and the 2.0 BlueHDI 180 (EHZ) both share a dry fill capacity of 6.8 liters, though the service fill differs slightly, with the EHS/EHT requiring 3.5-4 liters and the EHZ specified at a fixed 3.5 liters.
  • The 2.0 BlueHDI 180 AHH has a service fill range of 3-4 liters, indicating variability in the amount of fluid retained after draining, which is a common characteristic of automatic transaxles where torque converter drainage is incomplete without specialized equipment.
  • All four configurations in the specifications are listed under normal use conditions, meaning the stated capacities and intervals apply to standard operating environments rather than severe-duty cycles such as frequent towing or extreme temperature exposure.
  • The semi-automatic transaxle in the 1.6 BlueHDI 95 operates with substantially lower fluid volumes than the fully automatic transaxles found in the 2.0 BlueHDI variants, reflecting the mechanical differences between a semi-automatic unit and a conventional multi-speed automatic with a torque converter.

Other Systems