Peugeot 208 II

Manual transmission fluid capacity & service interval

Peugeot 208 II manual transmission fluid capacity ranges from 1,7 to 2,1 liters. Service intervals include normal use and filled for life. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
208 II 1.2 PureTech 100, HNB, HNE, HNK (2019- )
  • Use: Normal
  • Capacity 1,7-1,8 liter
  • Code: MB6 6/1
208 II 1.2 PureTech 130, HNL, HNS (2019- )
  • Use: Normal
  • Capacity 1,7-1,8 liter
  • Code: MB6 6/1
208 II 1.2 PureTech 75, HMH (2019- )
  • Use: Normal
  • Capacity 2,1 liter (Dry fill)
  • Capacity 2 liter (Service fill)
  • Code: MA 5/1
208 II 1.5 BlueHDi 100, YHY (2019- )
  • Use: Filled for life
  • Capacity 1,7-1,8 liter
  • Code: MB6 6/1
208 II 1.6 HDi 90, 9HP (2019- )
  • Use: Normal
  • Capacity 1,9 liter (Dry fill)
  • Capacity 1,8 liter (Service fill)
  • Code: BE4R 5/1

Additional Notes

  • The Peugeot 208 II 1.2 PureTech 75 (HMH) manual transaxle carries a dry fill capacity of 2.1 liters, which represents the total fluid volume required when filling a completely drained or rebuilt unit from scratch.
  • On the 1.2 PureTech 75, the service fill capacity drops to 2.0 liters, reflecting the residual fluid that remains in the transaxle after a standard drain procedure rather than a full overhaul.
  • The 1.6 HDi 90 (9HP) manual transaxle follows the same dry-versus-service fill distinction, with a dry fill of 1.9 liters and a service fill of 1.8 liters, indicating a 0.1-liter difference between a full rebuild fill and a routine fluid change.
  • The 1.2 PureTech 100 variants (HNB, HNE, HNK) and the 1.2 PureTech 130 variants (HNL, HNS) both share a capacity range of 1.7-1.8 liters for their manual transaxles under normal use conditions, without a separate dry fill figure listed.
  • A capacity expressed as a range, such as 1.7-1.8 liters, typically accounts for minor manufacturing tolerances or fill-point variation rather than representing two distinct service procedures.
  • The 1.5 BlueHDi 100 (YHY) manual transaxle is designated as filled for life, meaning the fluid is not subject to a scheduled drain-and-refill interval under normal operating conditions, and the 1.7-1.8 liter capacity figure applies to top-up or replacement scenarios only.
  • The normal use condition applied to the PureTech petrol variants and the 1.6 HDi 90 contrasts with the filled-for-life designation on the 1.5 BlueHDi 100, reflecting a difference in service interval philosophy between those engine and transmission pairings within the same model range.

Other Systems