Nissan Almera Tino (EU)

Manual transmission fluid capacity & service interval

Nissan Almera Tino (EU) manual transmission fluid capacity ranges from 2,3 to 4,8 liters. Service intervals include checks at 15000 km/12 months and 20000 km/12 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Almera Tino 1.8, V10 (2003-2006)
  • Use: <30.000 km/1 year
  • Capacity 3 liter
  • Check 15000 km/ 12 months
  • Code: RS5F70A 5/1
Almera Tino 2.2 dCi (100 kW), V10 (2003-2006)
  • Use: <30.000 km/1 year
  • Capacity 2,3 liter
  • Check 20000 km/ 12 months
  • Code: RS6F51R 6/1
Almera Tino 2.2 dCi (82 kW), V10 (2003-2006)
  • Use: <30.000 km/1 year
  • Capacity 2,3 liter
  • Check 20000 km/ 12 months
  • Code: RS6F51R 6/1
Almera Tino 1.8, V10 (2000-2003)
  • Use: Normal
  • Capacity 3 liter
  • Check 15000 km/ 12 months
  • Code: RS5F70A 5/1
Almera Tino 2.2 Di, V10 (2000-2003)
  • Use: Normal
  • Capacity 4,8 liter
  • Check 20000 km/ 12 months
  • Code: RS5F50A 5/1

Additional Notes

  • The Nissan Almera Tino (EU) manual transaxle fluid capacity varies notably across engine variants, ranging from 2.3 liters in the 2003-2006 diesel configurations up to 4.8 liters in the 2000-2003 2.2 Di variant.
  • The 2.2 Di V10 from 2000-2003 carries a 4.8-liter transaxle capacity, which is the largest figure across all listed configurations and reflects a significantly larger gearbox fill volume compared to the other engines in the same generation.
  • Both the 2.2 dCi 100 kW and 2.2 dCi 82 kW variants from 2003-2006 share an identical 2.3-liter transaxle capacity, despite the difference in power output between the two diesel engines.
  • The 1.8-liter V10 transaxle holds 3 liters across both the 2000-2003 and 2003-2006 model periods, meaning the capacity remained unchanged between the two production phases of that engine variant.
  • The 1.8 V10 from 2000-2003 carries a normal use condition, while the 2003-2006 version of the same engine applies a use condition of under 30,000 km or 1 year, which is the threshold defining the service interval context for that later specification.
  • The 1.8 V10 in both production periods specifies a fluid check interval of 15,000 km or 12 months, which is shorter than the 20,000 km or 12-month check interval applied to all 2.2-liter diesel variants.
  • The 2.2 Di from 2000-2003 uses a normal use condition alongside a 20,000 km or 12-month check interval, while the 2003-2006 diesel variants apply the under 30,000 km or 1-year use condition to the same 20,000 km or 12-month check interval.

Other Systems