Nissan Almera Tino (EU)

Coolant capacity & service interval

Nissan Almera Tino (EU) coolant capacity ranges from 6,75 to 7,05 liters. Service intervals include checks at 15000 km/12 months, 20000 km/12 months, 40000 km, and 45000 km/36 months, with changes at 60000 km/36 months, 60000 km/48 months, 90000 km/60 months, and 100000 km/60 months. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Almera Tino 1.8, V10 (2003-2006)
  • Use: Normal
  • Capacity 6,75 liter
  • Check 45000 km/ 36 months
  • Change 60000 km/ 48 months
Almera Tino 1.8, V10 (2003-2006)
  • Use: Initial service
  • Capacity 6,75 liter
  • Change 90000 km/ 60 months
Almera Tino 2.2 dCi (100 kW), V10 (2003-2006)
  • Use: Normal
  • Capacity 7,05 liter
  • Check 40000 km
  • Change 60000 km/ 36 months
Almera Tino 2.2 dCi (100 kW), V10 (2003-2006)
  • Use: Initial service
  • Capacity 7,05 liter
  • Change 100000 km/ 60 months
Almera Tino 2.2 dCi (82 kW), V10 (2003-2006)
  • Use: Normal
  • Capacity 7,05 liter
  • Check 40000 km
  • Change 60000 km/ 36 months
Almera Tino 2.2 dCi (82 kW), V10 (2003-2006)
  • Use: Initial service
  • Capacity 7,05 liter
  • Change 100000 km/ 60 months
Almera Tino 1.8, V10 (2000-2003)
  • Use: Normal
  • Capacity 6,75 liter
  • Check 15000 km/ 12 months
  • Change 60000 km/ 48 months
Almera Tino 2.0, V10 (2000-2003)
  • Use: Normal
  • Capacity 6,75 liter
  • Check 15000 km/ 12 months
  • Change 60000 km/ 48 months
Almera Tino 2.2 Di, V10 (2000-2003)
  • Use: Normal
  • Capacity 7 liter
  • Check 20000 km/ 12 months
  • Change 60000 km/ 36 months

Additional Notes

  • The Nissan Almera Tino (EU) cooling system capacity holds at 6.75 liters across both the 1.8 and 2.0 petrol variants, a figure consistent with a service fill rather than a full overhaul drain, where residual coolant typically remains in the block and heater circuit.
  • The 2.2 Di and both 2.2 dCi variants carry slightly larger cooling system capacities, at 7.0 liters for the 2.2 Di (2000-2003) and 7.05 liters for the 2.2 dCi configurations (2003-2006), reflecting the greater thermal load associated with diesel engines.
  • The 1.8 and 2.0 petrol variants from 2000-2003 share a coolant check interval of 15,000 km or 12 months under normal use conditions, while the 2.2 Di from the same period specifies a longer check interval of 20,000 km or 12 months.
  • A notable revision appears between model year brackets for the 1.8 petrol: the 2000-2003 specification calls for a coolant check every 15,000 km or 12 months, whereas the 2003-2006 specification extends the check interval significantly to 45,000 km or 36 months, while the change interval of 60,000 km or 48 months remains unchanged.
  • The 2.2 Di (2000-2003) carries a coolant change interval of 60,000 km or 36 months, which is shorter in time than the 48-month change interval specified for the 1.8 and 2.0 petrol variants covering the same production period, despite sharing the same 60,000 km distance threshold.
  • Both 2.2 dCi variants (100 kW and 82 kW) from 2003-2006 specify a coolant check interval of 40,000 km with no time-based counterpart listed, and a change interval of 60,000 km or 36 months under normal use conditions.
  • The 1.8 petrol (2003-2006) carries an initial service coolant change interval of 90,000 km or 60 months, which is distinct from the standard normal-use change interval of 60,000 km or 48 months. An initial service interval of this kind typically applies to the first scheduled fluid change from new, often reflecting extended-life coolant used at the factory fill.
  • Both 2.2 dCi variants (100 kW and 82 kW) from 2003-2006 share an identical initial service coolant change interval of 100,000 km or 60 months, which is longer than the 90,000 km or 60-month initial service interval specified for the 1.8 petrol of the same period.

Other Systems