Mitsubishi Endeavor (USA / CAN)

Transfer case fluid capacity & service interval

Mitsubishi Endeavor (USA / CAN) transfer case fluid capacity is 0,55 liter. Service intervals include checking at 30000 miles or 24 months, and changing at 30000 miles or 24 months, or 60000 miles or 48 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Endeavor 3.8 4WD (2002-2011)
  • Use: Normal
  • Capacity 0,55 liter
  • Check 30000 miles/ 24 months
  • Change 60000 miles/ 48 months
Endeavor 3.8 4WD (2002-2011)
  • Use: Severe
  • Capacity 0,55 liter
  • Change 30000 miles/ 24 months

Additional Notes

  • The Mitsubishi Endeavor 3.8 4WD carries a transfer case fluid capacity of 0.55 liter, a figure consistent with the compact transfer units found in mid-size SUV platforms of the era.
  • Under normal use conditions, a fluid check interval of 30,000 miles or 24 months is specified alongside a separate change interval of 60,000 miles or 48 months, meaning inspection precedes replacement by a full cycle.
  • Under severe use conditions, the change interval shortens to 30,000 miles or 24 months, which matches the check interval defined for normal use, reflecting the accelerated fluid degradation associated with demanding operating conditions.
  • The capacity value of 0.55 liter applies equally to both normal and severe use rows, confirming the figure represents the standard service fill volume rather than a full overhaul or drain-and-refill differential.
  • The severe use specification omits a standalone check interval, listing only a change interval of 30,000 miles or 24 months, which implies the fluid is replaced rather than inspected at each service point under those conditions.
  • The 2002-2011 model year span covered by the 3.8 4WD specification indicates no variation in transfer case fluid capacity or service intervals across the entire production range represented in the data.

Other Systems