Mitsubishi Endeavor (USA / CAN)

Automatic transmission fluid capacity & service interval

Mitsubishi Endeavor (USA / CAN) automatic transmission fluid capacity ranges from 8,4 to 8,8 liters. Service intervals include checking every 15000 miles or 12 months and changing every 30000 miles or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Endeavor 3.8 2WD (2002-2011)
  • Use: Normal
  • Capacity 8,4 liter
  • Code: F4A5A 4/1
Endeavor 3.8 2WD (2002-2011)
  • Use: Severe
  • Capacity 8,4 liter
  • Check 15000 miles/ 12 months
  • Change 30000 miles/ 24 months
  • Code: F4A5A 4/1
Endeavor 3.8 4WD (2002-2011)
  • Use: Normal
  • Capacity 8,8 liter
  • Code: W4A5A 4/1
Endeavor 3.8 4WD (2002-2011)
  • Use: Severe
  • Capacity 8,8 liter
  • Check 15000 miles/ 12 months
  • Change 30000 miles/ 24 months
  • Code: W4A5A 4/1

Additional Notes

  • The Mitsubishi Endeavor 3.8 2WD automatic transaxle holds 8.4 liters of fluid, while the 4WD variant requires 8.8 liters, reflecting the additional demands of the all-wheel-drive transaxle assembly.
  • Both the 2WD and 4WD configurations share the same severe-use service intervals, with a fluid check specified at every 15,000 miles or 12 months and a full fluid change at 30,000 miles or 24 months, whichever comes first.
  • The normal-use rows for both drivetrain configurations carry only a capacity figure, with no check or change interval listed alongside, whereas the severe-use rows include the full interval schedule.
  • The 0.4-liter difference in transaxle fluid capacity between the 2WD and 4WD models across the 2002-2011 production span remains consistent, indicating a stable design distinction between the two drivetrain variants throughout the entire model range.

Other Systems