MG MGA
Brake fluid capacity & service interval
MG MGA brake fluid specifications cover a capacity of 0.6 liter. The data includes four configurations. The fluid type specified is brake fluid for normal use.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| MGA 1600 (1959-1962) |
|
| MGA 1600 Mk. II (1959-1962) |
|
| MGA Twin Cam (1959-1962) |
|
| MGA 1500 (1955-1959) |
|
Additional Notes
- The MG MGA brake fluid capacity of 0.6 liter applies uniformly across all four variants covered in the 1955-1962 specifications, including the 1500, 1600, 1600 Mk. II, and Twin Cam.
- A 0.6 liter figure for a hydraulic brake system represents the total fluid volume held within the master cylinder reservoir, brake lines, and wheel cylinders combined, reflecting a relatively modest system typical of compact sports cars of the era.
- All four MGA variants specify normal use conditions, meaning the 0.6 liter capacity value is associated with standard operating environments rather than severe or high-demand service classifications.
- The MGA 1600 and MGA 1600 Mk. II share the same 1959-1962 production span and identical 0.6 liter brake fluid capacity, indicating no hydraulic system volume difference between the standard and Mk. II designations despite the Mk. II representing a higher engine specification.
- The MGA Twin Cam, which carries a distinct dual-overhead-camshaft engine configuration, carries the same 0.6 liter hydraulic brake system capacity as the pushrod-engined variants, confirming the brake circuit volume was not altered to accommodate the different drivetrain specification.