MG MG6
Power steering fluid capacity & service interval
The MG MG6 uses power steering fluid with a capacity ranging from 1.25 to 1.3 liters depending on the configuration. The data covers 3 different configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| MG6 1.9 DTi-Tech (2012-2016) |
|
| MG6 1.8 (2010-2016) |
|
| MG6 1.8T (2010-2016) |
|
Additional Notes
- The MG MG6 1.8 and 1.8T variants, covering 2010-2016, share an identical power steering fluid capacity of 1.25 liters under normal use conditions.
- The 1.9 DTi-Tech, available from 2012-2016, carries a slightly higher power steering fluid capacity of 1.3 liters compared to the two petrol variants in the same generation.
- A capacity figure for a power steering system represents the total fluid volume the reservoir and circuit hold during a standard service fill, not a full system overhaul with line flushing.
- All three engine variants across the 2010-2016 range specify power steering fluid capacity under normal use conditions, meaning standard operating environments without the added stress factors associated with severe use classifications.
- The 0.05-liter difference between the 1.8/1.8T petrol engines at 1.25 liters and the 1.9 DTi-Tech diesel at 1.3 liters reflects a modest but measurable variation in steering system volume, likely tied to differences in the hydraulic circuit design between the petrol and diesel configurations.