MG MG3
Power steering fluid capacity & service interval
MG MG3 power steering fluid capacity ranges from 0.92 liter to 1.2 liter depending on configuration. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| MG3 1.5 Euro 6 (2018-2024) |
|
| MG3 1.5 (2016-2017) |
|
| MG3 1.3 (2013-2015) |
|
| MG3 1.5 (2013-2015) |
|
Additional Notes
- The MG MG3 1.3 and 1.5 variants from 2013-2015 share an identical power steering fluid capacity of 1.2 liters, indicating a common reservoir and system design across both engine displacements in that generation.
- From 2016 onward, the MG3 1.5 power steering system capacity drops to 0.92 liters, a reduction of 0.28 liters compared to the 2013-2015 specification, reflecting a change in system design between generations.
- The 0.92-liter capacity figure applies to both the 2016-2017 MG3 1.5 and the 2018-2024 1.5 Euro 6 variant, meaning the power steering reservoir size remained consistent across those two generations despite the Euro 6 emissions compliance update.
- All four configurations carry a normal use condition designation, meaning the stated capacities apply to standard operating environments rather than severe or demanding service cycles.
- A capacity of 0.92 liters is relatively modest for a hydraulic power steering system, which is consistent with a compact passenger car where the rack-and-pinion assembly and reservoir are sized to match lower steering loads.
- The 1.2-liter capacity recorded for the 2013-2015 models represents a service fill volume, indicating the amount of fluid required to replenish or refill the power steering system during maintenance rather than a full overhaul displacement figure.