MG MG3
Coolant capacity & service interval
MG MG3 uses coolant with a capacity of 5,6 liters. The service interval for the fluid is 48 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| MG3 1.5 Euro 6 (2018-2024) |
|
| MG3 1.5 (2016-2017) |
|
| MG3 1.3 (2013-2015) |
|
| MG3 1.5 (2013-2015) |
|
Additional Notes
- The MG MG3 cooling system capacity holds at 5.6 liters across all engine variants and model years covered in the specifications, spanning the 1.3 and 1.5 configurations from 2013 through the 1.5 Euro 6 generation from 2018-2024.
- A 5.6-liter cooling system capacity is a service fill figure, representing the total volume of coolant the system holds when fully drained and refilled during a standard maintenance procedure.
- The 1.3-liter and 1.5-liter engines produced in 2013-2015 share an identical cooling system capacity of 5.6 liters, indicating no meaningful difference in cooling system volume between the two engine displacements in that generation.
- The 1.5-liter engine introduced for 2016-2017 carries forward the same 5.6-liter capacity and 48-month change interval established by the earlier 2013-2015 variants.
- The 1.5 Euro 6 variant covering 2018-2024 retains the 5.6-liter capacity and 48-month change interval, consistent with all preceding MG3 configurations in the specifications.
- A 48-month coolant change interval under normal use conditions is a time-based service schedule, meaning the coolant is replaced every four years regardless of mileage accumulated within that period.